Got A Drain Block? 3 Chemical-Free Strategies For Unblocking Clogged Drains

Water pooling in your bathroom sink is a source of real stress and needs an immediate remedy for you to use it once again. Hair and debris accumulated over time will block your drainpipes, so you will need to find ways to unclog them. This guide will help you with chemical-free strategies for unblocking your clogged drains. If they don't work, you will likely need intervention from qualified plumbers for undertaking the unclogging task.

A Solution Of Vinegar And Baking Soda 

A solution of baking soda and vinegar is relatively effective on clogs and is completely natural. This technique is also inexpensive because you'll most likely have these products readily available in your kitchen. Start by boiling water and pouring it down the drain. The heat from the water will begin the process of loosening the clogged debris from the drainpipe surface. Pour baking soda generously down the drain and let it sit for several minutes. The baking soda mixture will begin interacting with the clogged debris to loosen them from the surface. Finally, pour a glass of vinegar into the drain. You will notice a fizz. This is a good sign because the interaction between the vinegar and baking soda should completely loosen the debris from the drain. Flush this down with some more boiling water. Your bathroom sink should work fine now.

A Wire Hanger

This is one of the simplest methods for removing drain clogs but it only works on surface level blocks. You need to begin by unwinding the hanger neck and straightening it out as much as possible, taking care to leave the hook intact, since you need this for holding on to the clogged debris. Once you've prepared the wire hanger, remove the drain cover and lower the hanger through the pipe until you encounter some resistance. This is likely the clogged debris. You will have to push down and pry into the clog until you form a grip. Then pull out the hanger and you've likely pulled out the blocked debris from the drainpipe. This method works best on surface clogs, but if the clog is deeper then qualified plumbers are best equipped to tackle it.

A Plunger

A plunger is able to exert substantial pressure and force to loosen the clogged debris from the drainpipe surface. You simply need to insert your plunger over the drain and fill it with a little water. Push the plunger up and down in a quick motion. After a few plunging attempts, you may notice that the clog has shot right down your drain thanks to the forceful pressure created by the plunging action. This is an effective and chemical-free solution for your drain clog.

Chemicals can eat away or corrode your drainpipes, so follow these chemical-free solutions for removing drain clogs. If they don't work, be sure to call professional plumbers immediately to get your drains back to normal.